Ambika Engineering Works

• AC. Electrical Motor driven High Speed threading machine fabricated from heavy gauges pipes, angles & channels.
• Solid, Heavy Casting body for the bed of 3'6".
• Threading for upto 4" inch can be done in only 50 to 80 seconds.
• ABB AC drive can be fitted for RPM controller ( On request)
• Space Required: 4ft x 2ft x 3 ft.(approx.)
• Design can be modified as per customized request.
• Pipe pitch can be adjusted as per customers requirement

Pipe threading is necessary when you are repairing or updating pipes of old homes. The modern pipe threading machines are convenient portable units, which are relatively inexpensive as against their previous versions.

There are some specific advantages of using threads and they are listed below:

• The non symmetrical parts can be machined without hassles
• Users do not have to worry about the upper limit to internal and external diameters
• A single clamping set up can accommodate almost all the operations
• Short chips meant for simple control
• Surface finish of superior quality
• The blind holes do not need a thread relief groove
• Presence of interchangeable inserts
• Large diameter tap threading needs lesser power than the taps do
• A single insert can be designed for a wide variety of work piece materials
• The interrupted cuts are machined without any special condition
• A very limited range of tooling units is adept at covering a very wide range of applications that results in major lowering of the tool inventory costs

• Optimum performance
• Highly efficient
• Long working life

 We are offering the bestest quality of  Plastic Pipe Threading Machine at best quality.

• AC. Electrical Motor driven High Speed threading machine fabricated from heavy gauges pipes, angles & channels.
• Solid, Heavy Casting body for the bed of 3'6".
• Threading for upto 4" inch can be done in only 50 to 80 seconds.
• ABB AC drive can be fitted for RPM controller ( On request)
• Space Required: 4ft x 2ft x 3 ft.(approx.)
• Design can be modified as per customized request.
• Pipe pitch can be adjusted as per customers requirement

We offer all kinds of PVC Pipes Threading Machine.

Generally Pvc pipe threading are done by threading dies and taps which are highly expansive and needs special operator to do. Our machine does the threading by single point tool. Due to single point contact it make the whole concept highly economical and accurate. Mass production can be achieved which bring down the machining cost drastically lower.

Both Internal as well as external threading can be performed on same machine with very minor changes in Jigs. This change does not require any skill operator. A not skill worker will do all the need full work for this operation.

This Pvc Pipe threading machines can perform both types of Thread Profile i.e. "V" as well as Square Threads.

On this Pipe Threading Machine you can do Grooving for "O" ring and turning operation at same time. This machine can do threading easily on PVC, BRASS and ALLUMINIUM pipes. On this machine Taper Threading is also possible with some changes of Jigs.

• AC. Electrical Motor driven High Speed threading machine fabricated from heavy gauges pipes, angles & channels.
• Solid, Heavy Casting body for the bed of 3'6".
• Threading for upto 4" inch can be done in only 50 to 80 seconds.
• ABB AC drive can be fitted for RPM controller ( On request)
• Space Required: 4ft x 2ft x 3 ft.(approx.)
• Design can be modified as per customized request.
• Pipe pitch can be adjusted as per customers requirement

Product Details :- 

Pipe threading machines are used to create thread design that you see in pipes used for various applications. These thread design helps the pipe to screw and connect to the main component it is used for. For example if the pipe is used for water supplying than the thread connects the pipe to the main reservoir where the water is stored.

There are many benefits of using the machine and some of them are:

1. The automatic PVC pipe threading machine allows maintaining uniformity when cutting threads in pipe.
2. There can be a situation when thread at just one end of the pipe will not be enough and you will want to have it on both the ends. Here this machine will be very useful. You can have same type of thread at both the ends of the pipe.
3. You can also create custom thread design with the use of automatic PVC pipe threading machine.
4. Most of the pipe companies manufacture in bulk and the machine helps them cut thread quickly.
5. The machine not just carves thread in the pipes but it can also be used for cutting it in required size pieces.
6. Earlier the machines were slow but with the advancement in technology the machines have also improved and now they not just come with high efficiency level but they are also used for huge production.
7. The maintenance cost of these machines is also low. Thus you can save money when considering the total manufacturing cost.
8. Wide variety of threading machines is available in the market and you can buy one depending on your requirement. You can go for a fully automatic pipe threading machine or a semi automatic version. Along with large machines for industrial use you will find small portable threading machines in the market. These machines are easy to store and also can be carried to any project location. The small threading machines are mostly used in construction sites by professionals for plumbing purpose. The portable version is also good to be used in homes.Buying automatic PVC pipe threading machine is not difficult because when you browse online or venture into the market you will find a lot of companies dealing with such machines. But, in order to make sure that the machine quality is good you need to do some homework in form of research. You can check online and collect all the required details of different companies specialized in manufacturing and selling pipe threading machine. Compare their prices and then buy from the one that suits your need.

• Sturdy construction
• Hassle free functionality
• Less maintenance

Borewell is basically a narrow hole constructed to reach underground. They are constructed for several purposes but the main logic is to reach and extract any kind of liquid like petroleum or water or gas from underneath.

Once the hole is constructed normally a pipe is passed in so that the liquid or gas can flow through it to reach its destination. This pipe is connected to the main reservoir where the liquid is stored before supplying it to various locations. Thread in pipes makes the process of connecting it to the main component easy and the borewell pipe threading machines are used for the purpose. Here are some benefits of using threading machines.

Benefits:-

• These machines helps in maintaining uniformity when cutting thread. If the threads are uniform then the installation will be easy because normally when borewells are deep and it becomes difficult for people to get in and make sure that the work it perfect. Most of the underground work is done with the help of camera which is dropped in.
• There can also be situations when you might need a connector and to install it you will want to have threads on both side of the pipe. Borewell pipe threading machines make sure that same type of threading is done on both the ends.
• If you are planning of something new and you need a customized thread design then these machines are perfect. They are capable of providing customized thread design.
• If you are a borewell pipe manufacturer then these machines will be quite helpful to you, especially when attending to bulk orders. Earlier machines were slow but with advancement in technology the machines used today are highly efficient and you can even finish huge orders.
• A wide variety of borewell threading machines are available in the market. You can either go for a fully automatic or semi automatic version depending on your comfort and affordability. You can buy these machines online or offline from authorized stores. When you buy online you must make sure that you do adequate research regarding the company, its product quality and also the price. Do not just run behind companies offering the lowest quote. Make sure that the price of the product is compared with the quality and service they are offering.